Abstract
Polymers and plastics are main constituents of a variety of daily life products. Nevertheless, there is great public concern on these materials mainly due to waste and end-of-life management. This work reports an alternative for the recycle and reuse of End-of-Life Plastics (EOLP), as performance-enhancing additives of asphalt for road pavement. Physical–mechanical characteristics of Bitumen 50/70 mixtures containing different percentages of EOLP and other polyolefin waste (Secondary primary polymeric materials, SPPM) are compared to standard Bitumen. All mixtures where characterised to determine tensile strength, resistance by Marshall tests and Marshal quotation, density, air voids, indirect tensile strength (ITS), indirect traction coefficient (ITC). Data highlight that use of EOLP as bitumen modifier allows to improve Marshall Stability and ITS of road asphalts. Moreover, benign features of this process clearly appear due to the increase in plastic reuse and recycling, reduced plastic incineration, bitumen and additives consumption, waste management costs, CO2 production.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Bauer M, Lehner M, Schwabl D, Flachberger H, Kranzinger L, Pomberger R, Hofer W (2018) Sink–float density separation of post-consumer plastics for feedstock-recycling. J Mater Cycles Waste Manage 20:1781–1791. https://doi.org/10.1007/s10163-018-0748-z
Behnood A (2019) Application of rejuvenators to improve the rheological and mechanical properties of asphalt binders and mixtures: a review. J Clean Prod 231:171–182. https://doi.org/10.1016/j.jclepro.2019.05.209
Bressi S, Fiorentini N, Huang J, Losa M (2019) Crumb rubber modifier in road asphalt pavements: state of the art and statistics. Coatings 9:384–406. https://doi.org/10.3390/coatings9060384
Cao R, Leng Z, Yu H, Hsu SC (2019) Comparative life cycle assessment of warm mix technologies in asphalt rubber pavements with uncertainty analysis. Resour Conserv Recycl 147:137–144. https://doi.org/10.1016/j.resconrec.2019.04.031
Chen J, Huang B, Shu X (2013) Air-void distribution analysis of asphalt mixture using discrete element method. J Mater Civ Eng 25:1375–1385. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000661
Chhabra RS, Marik S (2014) A review literature on the use of waste plastics and waste rubber tyres in pavement. Int J Core Eng Manag 1:1–5. ISSN: 2348 9510
Cortavitarte MV, González PL, Pérez MAC, Vega II (2018) Analysis of the influence of using recycled polystyrene as a substitute for bitumen in the behaviour of asphalt concrete mixtures. J Clean Prod 170(1):1279–1287. https://doi.org/10.1016/j.jclepro.2017.09.232
EllenMacArthurFoundation. https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&cad=rja&uact=8&ved=2ahUKEwi1rO7P4-7lAhW3wAIHHdI1BLcQFjAAegQIABAC&url=https%3A%2F%2Fwww.ellenmacarthurfoundation.org%2Fassets%2Fdownloads%2FEllenMacArthurFoundation_TheNewPlasticsEconomy_Pages.pdf&usg=AOvVaw0JB32PciMix29jUcuv7GFW
Gupta A, Hernandez JR, Fresno DC (2019) Incorporation of additives and fibers in porous asphalt mixtures: a review. Materials 12:3156–3176. https://doi.org/10.3390/ma12193156
Hadidy A, Tan YQ (2009) Effect of polyethylene on life of flexible pavements. Constr Build Mater 23:1456–1464. https://doi.org/10.1016/j.conbuildmat.2008.07.004
Jambeck JR, Geyer R, Wilcox C, Siegler TR, Perryman M, Andrady A, Narayan R, Law KL (2015) Marine pollution. Plastic waste inputs from land into the ocean. Science 347(6223):768–771. https://doi.org/10.1126/science.1260352
Khan IM, Kabir S, Alhussain MA, Almansoor FF (2016) Asphalt design using recycled plastic and crumb-rubber waste for sustainable pavement construction. Procedia Eng 145:1557–1564. https://doi.org/10.1016/j.proeng.2016.04.196
Kirchherr J, Reike D, Hekkert M (2017) Conceptualizing the circular economy: an analysis of 114 definitions. Resour Conserv Recycl 127:221–232. https://doi.org/10.1016/j.resconrec.2017.09.005
Leng Z, Padhan RK, Sreeram A (2018) Production of a sustainable paving material through chemical recycling of waste PET into crumb rubber modified asphalt. J Clean Prod 180(10):682–688. https://doi.org/10.1016/j.jclepro.2018.01.171
Ling T, Lu Y, Zhang Z, Li C, Oeser M (2019) Value-added application of waste rubber and waste plastic in asphalt binder as a multifunctional additive. Materials 12:1280–1297. https://doi.org/10.3390/ma12081280
McKinsey Centre for Business and Environment (2016). https://www.mckinsey.com/business-functions/sustainability/our-insights/the-circular-economy-moving-from-theory-to-practice
Manju R, Sathya S, Sheema K (2017) Use of plastic waste in bituminous pavement. Int J ChemTech Res 10:804–811. ISSN: 0974-4290
Meherishi L, Sushimita AN, Ranjani KS (2019) Sustainable packaging for supply chain management in the circular economy: a review. J Clean Prod 237:117582. https://doi.org/10.1016/j.jclepro.2019.07.057
Mosa AM (2017) Modification of hot mix asphalt using polyethylene terephthalate (PET) waste bottles. SUST J Eng Comput Sci 18(1):62–73
Murugan L (2018) Use of e-plastic waste in bituminous pavements. Građevinar 70(7):607–615. https://doi.org/10.14256/JCE.1375.2015
Nkanga UJ, Joseph JJ, Adams FV, Uche OU (2017) Characterization of bitumen/plastic blends for flexible pavement application. Procedia Manu 7:490–496. https://doi.org/10.1016/j.promfg.2016.12.051
Rajasekaran S, Vasudevan R, Paulraj S (2013) Reuse of waste plastics coated aggregates-bitumen mix composite for road application—Green method. Am J Eng Res 2(11):2320–0936. ISSN: 2320-0936
Sojobi AO, Nwobodo SE, Aladegboye OJ (2016) Recycling of polyethylene terephthalate (PET) plastic bottle wastes in bituminous asphaltic concrete. J Clean Prod 3:1–28. 10397/77725
Tahami SA, Mirhosseini AF, Dessouky S, Mork H, Kavussi A (2019) The use of high content of fine crumb rubber in asphalt mixes using dry process. Constr Build Mater 222:643–653. https://doi.org/10.1016/j.conbuildmat.2019.06.180
UNI EN 933-1:2012 for particle size distribution
UNI EN 933-8:2015 for testing of the equivalent in sand
UNI EN 1097-6:2013 for the bulk mass of the granules
UNI EN 12697-5:2019 Determination of the maximum density
UNI EN 12697-6:2012. Determination of bulk density of bituminous specimens
UNI EN 12697-8:2019. Determination of void characteristics of bituminous specimens
UNI EN 12697-23:2018 for the determination of the indirect tensile strength
UNI EN 12697-30:2019. Specimen preparation by impact compactor
UNI EN 12697-31:2019 for samples packaging with rotatory press
UNI EN 12697-34:2012 for Marshall test
Vasudevan R, Sekar ARC, Sundarakannan B, Velkennedy R (2012) A technique to dispose waste plastics in an ecofriendly way—application in construction of flexible pavements. Constr Build Mater 28:311–320. https://doi.org/10.1016/j.conbuildmat.2011.08.03
Yu H, Zhu Z, Leng Z, Wu C, Oeser M (2019) Effect of mixing sequence on asphalt mixtures containing waste tire rubber and warm mix surfactants. J Clean Prod in Press. https://doi.org/10.1016/j.jclepro.2019.119008
Acknowledgements
This research was funded by POR FESR Veneto 2014-2020 Asse 1. Azione 1.1.4 (project title: Advanced waste recovery systems-ID 10057503). The authors would like to thank Dr. E. Cancino and Ing. A. Casotto and the team of Chimicambiente srl (Este, Padova) for their technical support, Elite Ambiente srl (Grisignano di Zocco, Vicenza) for the supply of various plastic material.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2022 Springer Nature Switzerland AG
About this chapter
Cite this chapter
Beghetto, V. et al. (2022). Environmentally Friendly Disposal of End-Of-Life Plastics for Asphalt Production. In: Ghadimi, P., Gilchrist, M.D., Xu, M. (eds) Role of Circular Economy in Resource Sustainability. Sustainable Production, Life Cycle Engineering and Management. Springer, Cham. https://doi.org/10.1007/978-3-030-90217-9_12
Download citation
DOI: https://doi.org/10.1007/978-3-030-90217-9_12
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-90216-2
Online ISBN: 978-3-030-90217-9
eBook Packages: EngineeringEngineering (R0)