Abstract
Aliphatic polyesters are readily degradable polymers, hydrolysis being the dominant mechanism of degradation. On one side, this makes them extremely interesting for industrial applications in which degradability is required. On the other side, they present considerable processing problems due to their sensitivity to process and stocking conditions. In this work, the degradation of two aliphatic polyesters was studied in the molten state by analysing the rheological properties with the aim of defining the significance of previous thermal history and of residence time at a given temperature. Rheological measurements were adopted as a mean of analysis for degradation kinetics because rheological properties are strongly dependent on molecular weight. In particular, the change in complex viscosity (at constant frequency) as a function of time at different temperatures was measured. The experimental results show that a significant reduction of viscosity takes place during the isothermal tests for all the materials analyzed. This reduction was ascribed to the hydrolysis reaction. Indeed, a dried sample showed only a marginal viscosity reduction. After this initial decrease, an increase in viscosity (more pronounced at higher temperatures) was found for all the materials and at all the temperatures investigated. This phenomenon was ascribed to the inverse reaction (esterification) taking place in the absence of water. The dried sample showed, in fact, a much faster increase in viscosity with respect to the undried one. The degradation kinetics was modeled considering both forward and reverse reactions. The relative rate of the two reactions depends on the moisture content, and thus the water evaporation from the sample was kept into account in the rate equations.
Similar content being viewed by others
References
Chandra R, Rustgi R. Biodegradable polymers. Prog Polym Sci. 1998;23:1273–335.
Camino G. Degradazione e stabilizzazione dei polimeri, Polimeri in medicina, XVIII Convegno Scuola AIM 1996.
La Mantia FP, Scaffaro R, Bastioli C. Recycling of a starch-based biodegradable polymer. Macromol Symp. 2002;180:133–40.
Park SH, Lim ST, Shin TK, Choi HJ, Jhon MS. Viscoelasticity of biodegradable polymer blends of poly(3-hydroxybutyrate) and poly(ethylene oxide). Polymer 2001;42:5737–42
Palade LI, Lehermeier HJ, Dorgan J. Melt rheology of high L-content poly(lactic acid). Macromolecules. 2001;34:1384–90.
Khanna YP, Han PK, Day ED. New developments in the melt rheology of nylons. I: effect of moisture and molecular weight. Polym Eng Sci. 1996;36:1745–54.
Colin X, Verdu J. Polymer degradation during processing. C R Chim. 2006;9:1380–95.
Seo KS, Cloyd JD. Kinetics of hydrolysis and thermal-degradation of polyester melts. J Appl Polym Sci. 1991;42:845–50.
Melik DH, Shechtman LA. Biopolyester melt behavior by torque rheometry. Polym Eng Sci. 1995;35:1795–806.
Ramkumar DHS, Bhattacharya M. Steady shear and dynamic properties of biodegradable polyesters. Polym Eng Sci. 1998;38:1426–35.
Daly PA, Bruce DA, Melik DH, Harrison GM. Thermal degradation kinetics of poly(3-hydroxybutyrate-co-3-hydroxyhexanoate). J Appl Polym Sci. 2005;98:66–74.
Harrison GM, Melik DH. Application of degradation kinetics to the rheology of poly(hydroxyalkanoates). J Appl Polym Sci. 2006;102:1794–802.
Partini M, Pantani R. FTIR analysis of hydrolysis in aliphatic polyesters. Polym Degrad Stab. 2007;92:1491–7.
Dealy JM, Larson RG. Structure and rheology of molten polymers. Germany: Hanser Publisher; 2006. p. 131–83.
Zhu KJ, Hendren RW, Jensen K, Pitt CG. Syntesis, properties, and biodegradation of poly(1,3-trimethylene carbonate). Macromolecules. 1991;24:1736–40.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Partini, M., Argenio, O., Coccorullo, I. et al. Degradation kinetics and rheology of biodegradable polymers. J Therm Anal Calorim 98, 645–653 (2009). https://doi.org/10.1007/s10973-009-0509-2
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10973-009-0509-2