Skip to main content

Embedded System for Real-Time Digital Processing of Medical Ultrasound Doppler Signals

Abstract

Ultrasound (US) Doppler systems are routinely used for the diagnosis of cardiovascular diseases. Depending on the application, either single tone bursts or more complex waveforms are periodically transmitted throughout a piezoelectric transducer towards the region of interest. Extraction of Doppler information from echoes backscattered from moving blood cells typically involves coherent demodulation and matched filtering of the received signal, followed by a suitable processing module. In this paper, we present an embedded Doppler US system which has been designed as open research platform, programmable according to a variety of strategies in both transmission and reception. By suitably sharing the processing tasks between a state-of-the-art FGPA and a DSP, the system can be used in several medical US applications. As reference examples, the detection of microemboli in cerebral circulation and the measurement of wall _distension_ in carotid arteries are finally presented.

Publisher note

To access the full article, please see PDF.

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to S. Ricci.

Rights and permissions

Open Access This article is distributed under the terms of the Creative Commons Attribution 2.0 International License (https://creativecommons.org/licenses/by/2.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Reprints and permissions

About this article

Cite this article

Ricci, S., Dallai, A., Boni, E. et al. Embedded System for Real-Time Digital Processing of Medical Ultrasound Doppler Signals. EURASIP J. Adv. Signal Process. 2008, 418235 (2008). https://doi.org/10.1155/2008/418235

Download citation

  • Received:

  • Accepted:

  • Published:

  • DOI: https://doi.org/10.1155/2008/418235

Keywords